Home › Electric Vehicles › German study finds Chinese, European and US EV motors differ mainly in materials and component design
Electric Vehicles

German study finds Chinese, European and US EV motors differ mainly in materials and component design

calendar_today
schedule 2 min read
Close-up of an electric vehicle being charged using a Mennekes EV connector.

Summary

RWTH Aachen's PEM chair analyzed 115 electric motors from 80 EVs spanning model years 2019 to 2025, finding that Chinese traction drives hardly differ from European and US designs in basic architecture. The study highlights a 45% rise in average peak power density since 2019, a shift toward 20,000 rpm motors, and differences in materials and cooling approaches.

The Chair of Production Engineering of E-Mobility Components (PEM) at RWTH Aachen University has analyzed 115 electric motors from 80 EVs of model years 2019 to 2025, focusing on the Chinese market.

According to the study, published in the journal Energies, the basic design of electric traction drives from Chinese manufacturers hardly differs from that of European and US models. The study points to a trend toward higher power densities and motor speeds, highly integrated drive units and direct oil cooling of the rotor and stator.

The study builds on a 2025 PEM study of 48 mostly European and US motors. Data come from the DARWIN benchmarking database of MOVO Autodatas Technology, PEM’s own teardown analyses and public sources.

Since 2019, the average peak power density of permanent magnet synchronous motors in the sample has risen by around 45%, partly because the motors run at higher average speeds. Maximum speeds in newer motors have shifted toward 20,000 rpm or higher. The average gear ratio was 9.45 for model years 2019 to 2021 and 11.48 for 2024 and 2025. “A key lever for higher power density is downsizing through higher speeds: the motors become more compact and require less material,” said study author David Drexler.

Of the 33 motors from model years 2019 to 2021, 29 were cooled by a water jacket. Of the 25 motors from 2024, 10 combine spin-spray cooling with direct cooling of the rotor lamination stack. “This has direct consequences for production, as it creates new requirements for the leaktightness of the rotor and stator lamination stacks,” said Drexler.

Numerous Chinese manufacturers use lighter magnesium alloys for housings, while European manufacturers continue to use aluminum. The study cites the availability of raw materials, labor costs and regulatory requirements among the possible reasons. Most Asian vehicles in the sample insulate busbar connections with powder coating, while numerous European vehicles and some Chinese premium models mount the copper busbars in a polymer component.

“The differences lie in the details, above all in the choice of materials and the design of individual components,” said Chief Engineer and co-author Henrik Born.

Source: RWTH Aachen University

Share this article

The Green Wire Weekly

Weekly deep dive into sustainable transport.

Comments

No approved comments yet. Be the first to comment.

Leave A Reply

Comments are temporarily unavailable.

Related Coverage