Home › Electric Vehicles › Fraunhofer IFAM's SIREN project to cut rare earth and copper use in electric motors with €2M funding
Electric Vehicles

Fraunhofer IFAM's SIREN project to cut rare earth and copper use in electric motors with €2M funding

calendar_today
schedule 2 min read
Close-up of an electric vehicle being charged using a Mennekes EV connector.

Summary

Fraunhofer IFAM has secured over €2 million from Saxony and the EU's ERDF to build electric motor research infrastructure in Dresden through its SIREN project. The initiative aims to reduce reliance on rare earths and copper using sinter-based additive manufacturing, multi-material laminated stacks, and aluminum windings with integrated cooling channels.

The Fraunhofer Institute for Manufacturing Technology and Advanced Materials (IFAM) will receive more than €2 million to build research infrastructure in Dresden for manufacturing electric motors. The goal is to make the motors less dependent on rare earths and copper.

The SIREN project focuses on establishing an end-to-end, sinter-based additive manufacturing process chain for electric drives, from materials development through the manufacture of complex components to fully functional demonstrators. Fraunhofer IFAM says that, unlike conventional manufacturing processes, the process chain allows different metallic materials to be combined selectively and can produce complex component geometries that would otherwise be difficult or impossible to make.

A particular focus is the development of multi-material laminated stacks, in which soft magnetic and non-magnetic materials are combined. Fraunhofer IFAM says the stacks enable new motor architectures, such as high-speed reluctance motors and ferrite-excited permanent magnet drives that can operate without rare earths.

Another research approach involves replacing copper with aluminum in the electrical windings. Fraunhofer IFAM aims to improve the properties of the aluminum windings for high-performance electric drives by incorporating cooling channels.

The research is aimed in particular at mobility applications that require compact designs, high power densities and reliable drive systems. Examples include air, land and underwater vehicles.

Fraunhofer IFAM plans to work with companies in drive technology, the supply industry and sintering technology, in particular to give small and medium-sized enterprises in Saxony access to the new manufacturing processes.

The funding comes from the Free State of Saxony and the European Union, through the European Regional Development Fund (ERDF), and extends to the end of 2028.

Source: Fraunhofer IFAM

Share this article

The Green Wire Weekly

Weekly deep dive into sustainable transport.

Comments

No approved comments yet. Be the first to comment.

Leave A Reply

Comments are temporarily unavailable.

Related Coverage