Home › Battery Technology › Dukosi launches evaluation kit for per-cell DCIR and EIS measurements in battery packs
Battery Technology

Dukosi launches evaluation kit for per-cell DCIR and EIS measurements in battery packs

calendar_today
schedule 2 min read
Dukosi launches evaluation kit for DCIR and EIS measurements on individual battery cells

Summary

Dukosi has released an evaluation kit that performs DC internal resistance and electrochemical impedance spectroscopy measurements on individual lithium-ion cells with lab-quality accuracy. The kit is aimed at helping battery supply-chain partners integrate faster, more accurate cell-level diagnostics into production battery management systems.

Dukosi has launched a DC internal resistance (DCIR) and electrochemical impedance spectroscopy (EIS) evaluation kit for its Smart Cell technology. The kit is designed to help battery supply-chain partners evaluate the technology and begin integrating the measurements into lithium-ion packs.

The kit takes separate DCIR and EIS measurements on each cell with “lab-quality accuracy” and requires no additional software or calibration.

Dukosi says its DCIR tests can be completed considerably faster than tests on competing systems. The tests are designed to give the BMS near-real-time insight into internal cell conditions. A DCIR test can return an ohmic resistance (R0) result in as little as one second. Each Cell Monitor board also provides per-cell voltage readings, and its on-die temperature sensor provides surface temperature readings. These readings are intended to support more accurate state of available power estimates and improved safety through more detailed thermal modeling.

EIS measurements track electrochemical changes in each cell and are intended to improve state of health estimation. Developers can run a full frequency sweep from 0.1 Hz to 3.5 kHz, or select target frequencies to reduce test time. Dukosi says customers who benchmarked its EIS against multiple competing systems reported the highest accuracy and measurement speeds 15 to 20 times faster.

The kit includes one Cell Monitor board (DK_DCIR_EIS_CM) and a System Hub unit (DK_DCIR_EIS_SH) that connects up to 216 Cell Monitor boards, plus cables and accessories for testing with a power supply or live cells. Developers can add one board per cell to build multi-cell networks that emulate a full battery pack. The kit’s graphical user interface shows a digital twin of the battery setup, and users can switch between DCIR and EIS tests without changing the hardware.

“Our smart cell monitoring solutions and proprietary C-SynQ communication protocol have gained significant market adoption,” said Joseph Notaro, President of Dukosi. “We’re building on that foundation with industry-leading, cell-level DCIR and EIS measurements that bring insights previously available only from high-end lab equipment directly into production-spec batteries. More accurate, consistent, and detailed cell data helps developers design safer, more reliable systems with longer operating lives.”

Source: Dukosi

Share this article

The Green Wire Weekly

Weekly deep dive into sustainable transport.

Comments

No approved comments yet. Be the first to comment.

Leave A Reply

Comments are temporarily unavailable.

Related Coverage