Home › Battery Technology › Tesla Cybercab battery pack designed for future LFP switch to cut robotaxi costs
Battery Technology

Tesla Cybercab battery pack designed for future LFP switch to cut robotaxi costs

calendar_today
schedule 3 min read
Tesla Model Y parked outdoors with a red display stand in front. Modern and sleek automotive design.

Summary

Tesla deliberately left extra space in the Cybercab's battery pack so it can later adopt cheaper lithium iron phosphate cells, a move aimed at lowering robotaxi operating costs. The pack also uses four individually sealed modules rather than a fully structural design, prioritizing serviceability for high-mileage fleet use.

Tesla built the Cybercab’s battery pack with empty space inside it on purpose, and the reason points to a cheaper robotaxi down the road.

Robert Sumpf, Tesla’s director of mechanical design engineering for battery modules and packs, said the extra room beside and beneath the Cybercab’s modules was left there so the company can move to lithium iron phosphate cells later. “So, we protected this pack to go to an even lower energy dense chemistry as we scale and need to bring LFP into the platform,” Sumpf said in a Cybercab deep dive with Munro Live.

The Cybercab runs on Tesla’s own 4680 cells with a nickel chemistry today. LFP cells store less energy for their size, so a straight swap would cut range. The reserved space lets Tesla add more LFP cells to make up the difference. In return, Tesla would get cells that cost less, run cooler and survive more charge cycles. LFP became the most used EV battery chemistry in the world last year.

Not all of that room was planned for a chemistry change. Lars Moravy, Tesla’s Vice President of Vehicle Engineering, said part of it exists because “we didn’t need as many batteries as we thought we did.” Tesla told Sandy Munro in early 2025 that it was targeting a Cybercab pack under 50 kWh with close to 300 miles of range.

The pack also breaks from the structural design Tesla used in some Model Y and Cybertruck builds. Instead of potting hundreds of cells into one block, the Cybercab uses four separate, individually sealed modules, so a bad module can be replaced without scrapping the whole pack. Sumpf was blunt about the older approach, giving the Model Y structural battery “a grade D” because it was hard to build and nearly impossible to repair. He estimated a fully structural pack gains about 10% more cell volume, but said “the issue is the service cost.”

That cost matters more for a car that rarely sits parked. Cybercab chief engineer Eric Earley said replacing an entire pack “before half a million miles is a killer on cost,” which is why remanufacturing and serviceability were built into the design from the start.

The same Munro Live tour produced Moravy’s admission that the Cybercab line at Giga Texas is now outpacing Robotaxi deployments, along with a look at the robotaxi’s unorthodox paint process. Tesla is aiming to deliver the first Cybercabs to outside customers by the end of 2026, though Elon Musk has said the vast majority will stay owned by Tesla and run as a transport service.

Sumpf did not give a date for an LFP version, name a cell supplier or say how a chemistry change would affect range. For now, the 4680 cars keep piling up: Texas DMV records from Tuesday list 544 Cybercabs authorized for Tesla’s Robotaxi fleet, more than the 507 Model Ys on the same roster for the first time.

Share this article

The Green Wire Weekly

Weekly deep dive into sustainable transport.

Comments

No approved comments yet. Be the first to comment.

Leave A Reply

Comments are temporarily unavailable.

Related Coverage