Home › Battery Technology › Gore launches MultiVent integrated battery vent combining pressure equalization and thermal-runaway evacuation
Battery Technology

Gore launches MultiVent integrated battery vent combining pressure equalization and thermal-runaway evacuation

calendar_today
schedule 2 min read
White modern car racing in city center and driving fast while turning on racetrack

Summary

W. L. Gore & Associates has introduced the GORE Battery Vents MultiVent Series, a single integrated vent for EV and energy storage battery packs that equalizes pressure, blocks moisture and evacuates gas during thermal runaway. The design replaces combinations of dual-stage vents, separate evacuation valves and desiccants, claiming up to six times the airflow of alternatives and sharply lower moisture ingress.

W. L. Gore & Associates has introduced GORE Battery Vents – MultiVent Series, an integrated vent for EV and energy storage battery packs. The device equalizes pressure, protects against moisture and evacuates gas during thermal runaway.

MultiVent gives pack designers an alternative to combining dual-stage vents, separate evacuation valves and desiccants. Gore says every additional component adds validation requirements, sealing complexity and potential paths for moisture intrusion, which can lead to corrosion, sensor faults and warranty costs.

The vent builds on technology Gore acquired from Vernay Laboratories in 2026 and combines a Gore membrane with Vernay’s valve technology.

MultiVent mounts through a single opening in the pack wall and uses two valves and a Gore microporous membrane. In normal operation, one valve opens at defined pressures and, combined with the membrane, allows the pack to breathe while blocking water, dust and debris. Airflow is 1,200 L/h at 100 mbar, which Gore says is up to six times that of alternative venting options and reduces the number of vents a pack needs.

In Gore laboratory testing at 22° C and 50% relative humidity, moisture ingress measured less than 20 mg per day, which Gore says is under one-tenth that of many commercially available dual vents.

For thermal-runaway evacuation, the larger valve opens at 50 mbar, provides an evacuation flow of 50 L/s at 180 mbar and then reseals the housing. Gore says MultiVent performs consistently after standard automotive aging tests and can resist typical thermal-runaway temperatures.

“For years, battery pack designers have been forced to balance airflow, moisture control and safety using separate components,” said David Slupe, Gore’s Strategic Marketing Leader for Batteries. “We think those challenges are connected. GORE MultiVent gives engineers a way to address them together with a simpler architecture.”

Source: W. L. Gore & Associates

Share this article

The Green Wire Weekly

Weekly deep dive into sustainable transport.

Comments

No approved comments yet. Be the first to comment.

Leave A Reply

Comments are temporarily unavailable.

Related Coverage